| |
|
A) Manual Film Processor
FMP-2 Manual Processor is the most popular sized thermostatically controlled unit suitable for general purpose use, either in a Radiographic Department or a Mobile Department.
FMP-3 Manual Processor is the largest of the standard range of Processors, particularly suitable for high film throughput.
FMP-4 Manual Processor with sealable lid and independent draining facility for each Tank. |
 |
|
| |
|
 |
| |
|
B) Film Dryer
Structurix DR Automatic Dryer
Currently, it’s the best known Auto Dryer in the industry with adjustable speed and temperature settings.
X-Ray Model Drying Cabinet
It is a large capacity Drying cabinet more suitable to the high throughput situation. Access is via the double front doors with a maximum capacity of 64 hangers of size 35 x 43 cm. |
 |
|
| |
|
|
| |
|
C) Safe Lights & Filters
-
Pyramid Safelight: Economically price safelight that can be mounted on the wall or the ceiling.
-
Beehive Safelight: Beehive safelight can be wall or ceiling mounted and may be tilted in its support frame.
- Ceiling Safelight: This unit is suspended from the ceiling on chains.
|
|
| |
|
|
| |
|
D) Processing Hangers & Clips
To facilitate the Manual Processing and Drying of the Film, and are manufactured from Stainless Steel depending on the Size of the films. |
|
| |
|
|
| |
|
E) Flexible Cassettes & Films
All types of flexible /Single Envelope Cassettes are of a similar design. They are single envelope, open at one end for loading and unloading film/ screens. |
 |
| |
|
| |
|
|
| |
|
F) Lead Intensifying Screens
Lead Intensifying Screens are thin sheets of lead foil mounted on card for ease of handling. One is place either side of X-ray film and in close contact with it, inside the cassette or film holder prior to expose to exposure. They are used in most radiographic techniques. |
 |
| |
|
| |
|
|
| |
|
G) High Intensity Viewers
The “Premier-view” range of high Quality Industrial X-ray Film Viewers are intended to provide the most suitable source of illumination for precise examination and interpretation of processed X-ray film.
- 10 x 40 cm Standard Weld Viewer
- 10 x 24 cm High Intensity Viewer
- Deluxe High Intensity Viewer
- Blind Masking Down Viewer
- 10 x 40 cm High Intensity Viewer
- 10 x 48 cm High Intensity Viewer
|
 |
| |
|
|
| |
|
H) Calibration Density Strips
Agfa Calibrated Density Strip : Calibrated and traceable to National Bureau of Standard. |
|
| |
|
| |
|
|
| |
|
Agfa Structurix Certified Density strip
The STRUCTURIX Certified Density strip is an X-ray film step tablet for calibrating optical densitometers used in NDT and industrial X-ray procedures.
Specifications:
• Number of Steps: 15
• Dimensions: 25.4 cm (L) x 3.5 cm (W)
• Range: less than 0.20 ˜ greater than 4.0 D |
 |
| |
|
| |
|
|
| |
|
I) Film Viewers
FV – 2013 Smart Handhold LED Industrial Film Viewer Li-Battery Powered
FV-2013 Handhold LED Industrial Film Viewer is a blend of all the characteristics of FV series LED Viewers. It is probably be the first one that don't need an external power supply on the market at present, but with built in lithium battery powered. And its luminance also reached 110,000 Cd/m2;, can easily observe the film with 4.0 D density. It can automatically detect the inner real-time temperature, and according to the high or low temperature, adjust the speed of the fan, if above the warning temperature then its luminance of viewer will be automatically reduced (4.0 density film still can be viewed). Input Voltage Range：85～264VAC 47～63Hz; Li Battery Capacity：12VDC 6000mAh.
|
 |
| |
|
| |
|
|
| |
|
FV – 2010T PLUS LED Industrial Film Viewer combine with Densitometer
FV-2010T PLUS LED Film Viewer is developed according to the Norm of ISO5580 Industrial radiographic illuminators - Minimum requirements. Inherited fine traditions of FV-2010 and FV-2009T, adopt powered LED area light source, enable the viewer to high luminance and excellent uniformity, theoretical lifetime span up to more than 50,000 hours.
As a new member of FV series LED film viewer, FV-2010T PLUS is extremely suitable for fieldwork where large film was used. Can view films to 4.1H/D, meet the needs of daily use. It adopts constant current power which is specially designed to the viewer. With its help, the LED will be protected notably, so the lifetime can be extended. For the sake of Safety use, low voltage PWM unlimited dimmer is used. Foot mode and hand mode are equipped. |
 |
| |
|
| |
|
|
| |
|
FV – 2009 Portable Industrial LED Film Viewer
FV-2009 LED Film Viewer is developed according to Norm of ISO5580 Industrial radiographic illuminators - Minimum requirements. Inherited fine traditions of FV-2008, adopt powered LED area light source, enable the viewer to high luminance and excellent uniformity, theoretical lifetime span up to more than 50,000 hours.
FV-2009 is extremely suitable for fieldwork. Can view films to 4.0H/D, meet the needs of daily use. It adopts constant current power which is specially designed to the viewer. With its help, the LED will be protected notably, so the lifetime can be extended. For the sake of Safety use, low voltage PWM unlimited dimmer is used. Foot mode and hand mode are equipped. |
 |
| |
|
| |
Specification
Film Viewer Type |
FV - 2013 |
FV - 2010T PLUS |
FV - 2009 |
Max. Luminance： |
≥110,000Cd/m2 (350,000 Lux) |
≥130,000Cd/M2 (408,200Lux) |
≥103,000Cd/M2 (323,420Lux) |
Uniformity: |
g≥0.95 Diffusion Factor ≥0.95 |
g≥0.95, Diffusion Factor: σ’≥0.95 |
g≥0.9, Diffusion Factor: σ’≥0.95 |
Accuracy： Density(Densitometer): |
4.0H/D Max Viewing |
±0.02D, Max.
>= 5.0D |
|
Viewer window: |
6"×1.8" (150×45mm) |
400×100mm (15.8×4 inch) |
200×60mm |
Surface temp. rise |
≤ 15℃ After 12 hours continues maximum luminance |
≤18oC
After 12 hours continues maximum luminance |
≤ 15oC
After 12 hours continues maximum luminance |
POWER: |
30W |
85-264VAC 47~63Hz.(Full range)
|
Dimension: |
12"×3.3"×1.6", 304×85×640mm(L×W×H) |
600×80×160mm
23.6×3.1×6.3 inch (L×W×H) |
17.9×5.5×2.6"
455×140×65mm (L*W*H) |
Weight: |
2.2lbs (1.0Kg) |
4Kg (8.8 lbs) |
5.5pounds(2.5kg) |
|
|
| |
|
| |
|
